Throttle Body Installation
#2
RE: Throttle Body Installation
easy install,
take off the tb hat,
take off the 4 bolts that hold it down,
remove the linkage,
unplug all the connectors and out it comes
look down into the intake manifold with a flashlight and look for any oil pooling on the bottom
if there is any oil, then you have a leaky plenum gasket...
take off the tb hat,
take off the 4 bolts that hold it down,
remove the linkage,
unplug all the connectors and out it comes
look down into the intake manifold with a flashlight and look for any oil pooling on the bottom
if there is any oil, then you have a leaky plenum gasket...