2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

overhead temp clock and mileage reader

Thread Tools
 
Search this Thread
 
  #1  
Old 10-13-2008 | 02:50 PM
grizzlyfarmer2's Avatar
grizzlyfarmer2
Thread Starter
|
Rookie
Joined: Jul 2008
Posts: 57
Likes: 0
Default overhead temp clock and mileage reader

so i was wondering where I could get the overhead clock readout with the mileage and compass such in it. My dads old ram had it but a lot of them dont. I was curious wat the cost of one would be at a dealer or if it would be possible to strip one out of an old junker. old junker sounds like a lot of work being i would assume there is a lot of wiring running to it.
 
  #2  
Old 10-13-2008 | 05:37 PM
jasonw's Avatar
jasonw
Site Moderator
Joined: Jan 2008
Posts: 8,374
Likes: 24
From: Sioux Falls, SD
Default

There is a bit of wiring, and most units that do not have the unit already in it won't have the wiring either, so you would have to run wires.

As with some parts, getting the stuff from a yard would be the cheapest but most work for yourself, and the dealership/shop will be the most expensive but easiest.
 
  #3  
Old 10-13-2008 | 05:50 PM
grizzlyfarmer2's Avatar
grizzlyfarmer2
Thread Starter
|
Rookie
Joined: Jul 2008
Posts: 57
Likes: 0
Default

any clue wat the cost at the dealership would be?
 
  #4  
Old 10-13-2008 | 07:47 PM
PurplDodge's Avatar
PurplDodge
Legend
Joined: Jan 2008
Posts: 8,321
Likes: 12
From: Indiana
Default

search the thread "overhead console" it was started by me
 
  #5  
Old 10-13-2008 | 08:01 PM
PurplDodge's Avatar
PurplDodge
Legend
Joined: Jan 2008
Posts: 8,321
Likes: 12
From: Indiana




All times are GMT -4. The time now is 07:29 PM.