2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Transmission help 96 ram2500 5.9L 4wd

Old Nov 7, 2008 | 06:22 PM
  #1  
langdonknight's Avatar
langdonknight
Thread Starter
|
Registered User
Joined: Nov 2008
Posts: 4
Likes: 0
Default Transmission help 96 ram2500 5.9L 4wd

Hey all,

New to the forum alot of great info on here. I have a problem. I have a 1996 Ram 2500 360 4wd. I think I lost OD. It doesnt seem to be shifting down into OD. The light on my button is off so it says its on but not shifting down. Im thinking a sensor possibly. At least I hope thats all it is.

thanks
 
Reply
Old Nov 7, 2008 | 10:40 PM
  #2  
jasonw's Avatar
jasonw
Site Moderator
Joined: Jan 2008
Posts: 8,374
Likes: 28
From: Sioux Falls, SD
Default

Bump.
 
Reply
Old Nov 8, 2008 | 12:43 PM
  #3  
MonteC's Avatar
MonteC
Record Breaker
Joined: Nov 2003
Posts: 1,256
Likes: 2
From: North Charleston, SC
Default

So the truck stays in 3rd gear?
 
Reply
Old Nov 9, 2008 | 03:00 PM
  #4  
langdonknight's Avatar
langdonknight
Thread Starter
|
Registered User
Joined: Nov 2008
Posts: 4
Likes: 0
Default

yes it stays in 3rd
 
Reply
Old Nov 9, 2008 | 04:47 PM
  #5  
bigster's Avatar
bigster
Professional
Joined: Nov 2008
Posts: 131
Likes: 0
From: Brussels, Belgium
Default

Have you tried checking the OD button on the dash if it sticks? Take it out and test it with an Ohmmeter. Check for blown fuses also.

Greetz,

Bigster
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 07:40 PM.