10x3 air cleaner
#1
10x3 air cleaner
i chose to go with the 10x3 air cleaner. so far i like it i haven't driven the truck yet i will take it to work in the morning. i like the look of the smaller filter, it sure cleaned up the underside of the hood. not to mention the chrome looks good too. the one i got was from auto zone, i didnt have to use the spacer everything cleared. also it had the hook up for the PCV hose, and i liked that. thanks to all whop have given there input on this little mod.
#4
#5
#6
I've posted pics in the past of what an open filter looks like after going through just a few large mud holes, but i'll post again below. Not pretty for the round filter setup. If your talking about street puddles and stuff, should be fine. Otherwise, if you like to do puddles like what I did here, your better off staying with the stock air assembly.
I only made about 4 passes through this mud hole, and here is the result. I was carrying a spare filter luckily, and there was a little water on my TB, but not in the intake. A few more passes though, and I probably would have hydrolocked.
I only made about 4 passes through this mud hole, and here is the result. I was carrying a spare filter luckily, and there was a little water on my TB, but not in the intake. A few more passes though, and I probably would have hydrolocked.
Last edited by Silver_Dodge; 06-04-2013 at 01:05 AM.
#7