Radiator drain plug clogged?
Administrator
Joined: Apr 2010
Posts: 87,267
Likes: 4,197
From: Clayton MI
Radiator plug is a 'bayonet' style mount, push in quarter turn, push some more, 'nother quarter turn.
Should be just a couple pipe plugs at the bottom center on each side of the block. (just above the oil pan rail)
Should be just a couple pipe plugs at the bottom center on each side of the block. (just above the oil pan rail)
Hall Of Fame
Joined: Jul 2006
Posts: 12,204
Likes: 10
From: Gainesville, Ga.
do NOT push hard. its all plastic. the in/out movement is pretty large, 3/4 - 1 inch. the turns are pretty modest. like Hey said, about 1/4 turn. apply a little vasoline to the o-rings.
