When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
rm indy- i just checked out your page and your truck looks great!!!....its amazing what a little bit of paint can do for looks, especially in the inside....ive painted a lil in my inside and am gonna do more later
rm indy- i just checked out your page and your truck looks great!!!....its amazing what a little bit of paint can do for looks, especially in the inside....ive painted a lil in my inside and am gonna do more later
Thanks, but be carefull of the painting bug, its as addictive as the performance bug. So far Ive done 47pieces paint & 159 in powdercoating. (5paint/8powder by shops)
x2 on replacing the broken wheel lug, its a disaster waiting to happen!
With a 180 thermo in my 5.9 it rarely went over 185deg. Sure you have a 180 in there?
It couldn't possibly be any easier, punch the old one through, put the new one in and slide some slightly oversize washers or a larger lug nut over it. Take one of your lug nuts and tighten it down until the new one is seated.
aight, thanks....wasnt sure if i could do it w/o removing the axle.....i have a 180 and its runnin about 220 or so.......i know it needs flushed and cleaned for sure, it was pretty nasty when i had my heads off