When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
can someone help me I can't find the sequence and I try and watch and make sure they have cycled but when I try to turn the motor over more it stops and gets really hard to turn over, any clues? I am trying to torque down the rockers arms....
Make sure the push rods are lined up and just tighten each (of the 2 bolts) a little at time,until they are seated. Then do the final torque. And btw, if you feel better doing it the way you have been, remove the spark plugs and the motor will turn over easier.
Alrighty figured it out after calling marty at krc, I had advanced the chain 2* and was hitting valve and pistons lol. All good and tqed thanks z for the help.