yea please make one for you first! and I'm not to worryed about the switches i have a switch box that controls my bar but for fogs and other stuff i have them. and i would give u 100 im to lazy to do it my self.

 

well... I started today! Got my MDF ripped to size at Home Depot! Let the fun begin.... I will prolly do a write up when I have it done Dodge15004x45.9... PM with what you want and I'll see what I can do!

 

I gave up with my center console idea. Instead I put my Code3 V-Con (http://www.code3pse.com/productdtl.a...milyid=4&id=24) up top where the overhead console goes....which was broken . I ran all of the wiring up top as well...can get pics if wanted. I would rather reach up than bend down to turn my stuff on.

 

i have to many dash light to runit along the top of the wind sheld just got me another one.

 

Believe it or not....it all tucks into the headliner.

I have 2 dual code3 LED-X ext. modules + 2 single led x ext. modules in the rear window...and a Whelen talon above the rear-view. (Not to mention the dashlaser that I am using for temp. dash light)

 

hey guys posted some pics of myy prohress today... click on the link: http://www.flickr.com/photos/esacizac/


1. got MDF
2. Cut to size
3. brad nailed together
4. took middle seat out
5. wedged new console in
6. put seat back


I'm using 1/2 inch MDF ripped to 9 inches wide for the base unit... the oveall opening is 10in. this will leave room for my 1/2in side panels... those will start tomorrow


Feed back wanted

 

Looks nice, ya got talent. Got a little distracted by your mod photos...but got back on track. From the looks of it, you needed change... :-p

 

Looks great so far!

 

only problem i see is the bud light....nasty

 

i like the beer cans lol. and i have 2 star mini phantom 1 whelen miser and my whelen edge 28.5 long 4 light 2 alleys and 2 work light. and of the other light are up front nothing rear and i don't plan on putting any facing the rear.