2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

where does this go?

Thread Tools
 
Search this Thread
 
Old Feb 16, 2009 | 11:48 PM
  #1  
meanwhitemopar's Avatar
meanwhitemopar
Thread Starter
|
Record Breaker
Joined: Aug 2008
Posts: 1,354
Likes: 1
From: stationed in nc
Default where does this go?

there is a vac line on the front of the intake. and the line that is atached is about four foot long but i cant figure out where it runns to....
 
Reply
Old Feb 16, 2009 | 11:54 PM
  #2  
Rex-TheDOGG's Avatar
Rex-TheDOGG
Captain
Joined: Jul 2008
Posts: 678
Likes: 1
From: Houston, TX
Default

If you have cruise control it might be that. Should plug into a y-conector coming off passenger side of keg.
 
Reply
Old Feb 17, 2009 | 01:56 AM
  #3  
xskylinedx's Avatar
xskylinedx
Record Breaker
Joined: Oct 2007
Posts: 1,031
Likes: 0
From: Vermont
Default

If its on the front pass. side of the TB then I'm pretty sure that goes to the HVAC.
 
Reply
Old Feb 17, 2009 | 01:34 PM
  #4  
meanwhitemopar's Avatar
meanwhitemopar
Thread Starter
|
Record Breaker
Joined: Aug 2008
Posts: 1,354
Likes: 1
From: stationed in nc
Default

well i have the cruise control hooked up but thats not it.... its on the front of the intake, about center but more towards the passengers side... but ok, my whole HVAC system on the frame rail is gone... so is a usless hose for me right? or am i thinking of something differant on the frame rail (passengers side)
 
Reply
Old Feb 17, 2009 | 01:58 PM
  #5  
xskylinedx's Avatar
xskylinedx
Record Breaker
Joined: Oct 2007
Posts: 1,031
Likes: 0
From: Vermont
Default

the cruise control vac line is located on the passenger side of the kegger. I think what
your talking about leads to the HVAC canisters on the passengers side of the engine
compartment. It would be helpful if you took a picture of what your looking at.
 
Reply
Old Feb 17, 2009 | 02:02 PM
  #6  
Rex-TheDOGG's Avatar
Rex-TheDOGG
Captain
Joined: Jul 2008
Posts: 678
Likes: 1
From: Houston, TX
Default

Are you talking about the TB or the intake?

EDIT: Ok, I see what your talking about now. I went out and looked at mine, and that vacuum line goes to the fuel evap purge solenoid on the pass side fender.
 

Last edited by Rex-TheDOGG; Feb 17, 2009 at 02:12 PM.
Reply
Old Feb 17, 2009 | 02:42 PM
  #7  
meanwhitemopar's Avatar
meanwhitemopar
Thread Starter
|
Record Breaker
Joined: Aug 2008
Posts: 1,354
Likes: 1
From: stationed in nc
Default

ok, thats what i have it hooked up to right now it just doesnt look like the line is running the right way becuase that line runs in a big box. so i wasnt sure... but thanks guys
 
Reply




All times are GMT -4. The time now is 09:28 AM.