2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

OBD code P1294

Old Feb 19, 2009 | 11:26 PM
  #1  
WILLIAMJODI's Avatar
WILLIAMJODI
Thread Starter
|
Registered User
Joined: Feb 2009
Posts: 9
Likes: 0
From: Central PA.
Default OBD code P1294

Does anyone know what this code means 1997 1500 5.9L thanks in advance
 
Reply
Old Feb 19, 2009 | 11:49 PM
  #2  
dodgeman22's Avatar
dodgeman22
Veteran
Joined: Dec 2007
Posts: 349
Likes: 2
From: Saskatoon, Saskatchewan
Default

i believe that means target idle not reached
 
Reply
Old Feb 20, 2009 | 12:00 AM
  #3  
helms's Avatar
helms
All Star
Joined: Jun 2007
Posts: 981
Likes: 0
From: Langley, BC, Canada
Default

SYMPTOM
P1294-TARGET IDLE NOT REACHED

WHEN MONITORED
With the engine idling and in drive, if automatic. There must not be a MAP sensor trouble code or a throttle position sensor trouble code.

SET CONDITION
Engine idle is not within 200 rpm above or 100 rpm below target idle for 14 seconds . Three separate failures are required to set a bad trip. Two bad trips are required to set the code.

POSSIBLE CAUSES


Intermittent condition
Vacuum leak
Air induction system
Throttle body and throttle linkage
IAC driver circuit open
PCM
 
Reply
Old Feb 20, 2009 | 12:04 AM
  #4  
helms's Avatar
helms
All Star
Joined: Jun 2007
Posts: 981
Likes: 0
From: Langley, BC, Canada
Default

Name:  test1-3.gif
Views: 2121
Size:  19.2 KB
Name:  test4-7.gif
Views: 1825
Size:  32.5 KB
Name:  test8.gif
Views: 1757
Size:  22.0 KB
 
Reply
Old Feb 20, 2009 | 02:02 AM
  #5  
WILLIAMJODI's Avatar
WILLIAMJODI
Thread Starter
|
Registered User
Joined: Feb 2009
Posts: 9
Likes: 0
From: Central PA.
Default

Thanks again
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 06:50 AM.