OK That is enough
Champion
Joined: Feb 2009
Posts: 3,416
Likes: 4
From: Bay Area, CA
start pulling codes. the ABS & brake light just happened to me. I fixed it by replacing the ABS speed sensor. cost me 40 bucks. When you do it, remember to reset the computer. Hang in there. Like my dad use to tell me, When it rains, it pours.
Thread Starter
|
Captain
Joined: Apr 2008
Posts: 732
Likes: 0
From: Grand Forks, ND
well not all seems bad now at least.
i messed with all vacuum hoses and switched the two that go into the front axle around and now it works randomly. I tried that at first but nothing changed. but now it did.
soon after that my break and abs light dont come on idk why but they dont
so now only my tranny is messed have very little reverse. almost got stuck in the middle of a road outside of town when needed to turn around last night. when i turn at all the tranny just doesnt seem to have the power to get the 35s going again. and it slips when trying to shift to 2nd. i have the CEL reader from advanved and it gave me a code that my haynes book doesnt have the short description on the reader says its in the tranny at least.
i messed with all vacuum hoses and switched the two that go into the front axle around and now it works randomly. I tried that at first but nothing changed. but now it did.
soon after that my break and abs light dont come on idk why but they dont
so now only my tranny is messed have very little reverse. almost got stuck in the middle of a road outside of town when needed to turn around last night. when i turn at all the tranny just doesnt seem to have the power to get the 35s going again. and it slips when trying to shift to 2nd. i have the CEL reader from advanved and it gave me a code that my haynes book doesnt have the short description on the reader says its in the tranny at least.