aftermarket bumpers
I will be if and when I get around to it. LOL (for my rear first)
Still can't decide if I want to use tube or 1/8" plate.
But like others have said, everything that you can buy is usually well over $1000. You can sometimes find a used one for $800+, and those are considered deals.
Still can't decide if I want to use tube or 1/8" plate.
But like others have said, everything that you can buy is usually well over $1000. You can sometimes find a used one for $800+, and those are considered deals.
Banned
Joined: May 2008
Posts: 1,031
Likes: 0
From: The Communist Puppet State of Mexifornia
Tough Country in El Campo, TX, ask for Reggie and tell him Nicco sent ya;> www.4wheelparts.com or Insane Racing in El campo, TX ask for Patrick tell him Nicco sent ya and there's Off Road something or other I can't remember the full name but they are located in Rosenberg, TX
Professional
Joined: Feb 2007
Posts: 116
Likes: 0
I did a lot of research on this for my 98 Ram 1500 4x4 Sport the past few months. The REPUTABLE places that I found were
Tough Country
Ranch Hand
Buckstop
I my case I did not go with Tough Country as they swore up and down the wall that their REPLACEMENT bumpers would not fit a sport model (I still think they are full of crap). I ended up going with Tough Country and have been very happy. Mine ended up running ~$1650 shipped for the model and accessories I purchased. You can see it at the link below.
https://dodgeforum.com/forum/2nd-gen...ook-right.html
Tough Country
Ranch Hand
Buckstop
I my case I did not go with Tough Country as they swore up and down the wall that their REPLACEMENT bumpers would not fit a sport model (I still think they are full of crap). I ended up going with Tough Country and have been very happy. Mine ended up running ~$1650 shipped for the model and accessories I purchased. You can see it at the link below.
https://dodgeforum.com/forum/2nd-gen...ook-right.html
Banned
Joined: May 2008
Posts: 1,031
Likes: 0
From: The Communist Puppet State of Mexifornia
Why in the world would they lie to you? I seriously doubt they'd turn away business.
Professional
Joined: Jan 2007
Posts: 205
Likes: 0
From: Kitchener, ON, Canada
No kidding... usually the guys who have never fabricated a thing in their life are the ones who want custom things for next to nothing.
Professional
Joined: Feb 2007
Posts: 116
Likes: 0
It was not so much that they said it was not compatible but the fact that they could not explain why. To the best of my knowledge once you have the old front bumper off there is no difference between a standard and sport edition. The fact that TC said that there is no difference AND the new bumper fits great makes me suspect that RH was wrong. Regardless, on a specialty product like that from a smaller company I would expect them to be able to explain why it is not compatible.