I want to erder the sway bar bushings form Summit but don;t know which ones to order. They have 2 sizes, 32mm and 30mm, both listed for the 1500 5.2l. Is there anyway of knowing which ones are correct?

Heres the link to Summit.

http://store.summitracing.com/partde...5&autoview=sku

 

Ummm, just go measure your sway bar.

 

When I did mine, I used the 32mm. You could order both kits, and then just return the one you don't use.

 

omg that was too funny!
Seriously, take one of the bushings off and take it to a hardware store Try different bolts to see which one fits. Or you could try a machine shop. Anyone who cuts rotors should have a micrometer to measure the bar.

 

I just used one of these to measure mine. I had one laying around in my garage, but you can buy them at walmart, home depot, or auto parts store for a couple of bucks.