2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Ignition Harness

Thread Tools
 
Search this Thread
 
Old May 24, 2009 | 11:50 AM
  #1  
BlueDemon01's Avatar
BlueDemon01
Thread Starter
|
Rookie
Joined: Feb 2008
Posts: 55
Likes: 0
From: Texas
Default Ignition Harness

Is the ignition harness located just behind the parking brake? I've had this whole quick alarm setup I bought and I finally feel like putting it in.

Also, does anyone know if there is somewhere you could feed a couple of wires through the back of the radio? I just hooked up some subs but I want to kinda hide those sparkly wires comin out the back of my headunit.
 
Reply
Old May 25, 2009 | 01:33 AM
  #2  
speeddemon31176's Avatar
speeddemon31176
All Star
Joined: May 2009
Posts: 754
Likes: 0
From: Carbondale,PA
Default

Plenty of room behind the headunit to hide wires. The ignition harness is actually in the column just forward of the ignition key assembly. You need to take the column cover off the steering column to access it.
 
Reply
Old May 25, 2009 | 05:43 PM
  #3  
BlueDemon01's Avatar
BlueDemon01
Thread Starter
|
Rookie
Joined: Feb 2008
Posts: 55
Likes: 0
From: Texas
Default

Alright thanks, I did my whole wire tuck yesterday, took off the steering colomn cover, and saw two different modules in there. I just dont want to splice something, then end up going to the dealership for re-programming or anything.
But I want to install this damn alarm...
 
Reply
Old May 25, 2009 | 06:24 PM
  #4  
lv360ram's Avatar
lv360ram
Captain
Joined: Mar 2007
Posts: 632
Likes: 1
From:
Default

http://www.commandocaralarms.com/wir...ickup/427.html
 
Reply




All times are GMT -4. The time now is 05:52 PM.