bought some fancey @$$ headlights, need help wif stuffs
no im talking about just removing them, one guy sed to remove the bumper trim and id be fine. i wanna no what im doing before im going into it blinded.
You don't have to remove any part of the bumper to remove the headlights. There is a small phillips screw on the side of the light in the lower corner that goes to your flasher housing. Remove that screw and the whole flasher light will come out. Then you will have access to the other screws for the main headlight housing. Once you have it out, you can then remove the headlight frame. ( can you tell I have replaced a few of these?
)
)
Last edited by Laramie1997; Jun 4, 2009 at 06:06 PM.
theres 3 bolts that hold the stockers in, pop the hood and look next to the headlight you'll see the one, the second is just below it a little ways, i used a swivel on an extension to get that one and the pain is the butt one is under the blinker, i never took the plastic piece off the bumper which i am sure would make it that much easier, i don't know how to do that but i am quite sure someone on here has done that, but i got in a hurry cause i wanted to see what these where going to look like, and i like them if only i could figure out the driving lights...i'll post pics later tonight.



