When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
my truck is a 2wd, i put 2" lowering shackles on the back of it and it is still 2" higher in the rear.....is that normal for the stock rear to pretty much be 4" higher than the front?.......i dont have any blocks or AAL on it......
its pretty normal for a full size to have a 4" rake. they are meant to take so much wieght without squatting. you could de-arch the springs 2" or put the stock shackles back in and get a flip kit, but bringing the rear down that far may require a c-notch to give the suspension some travel.
Mine probably has like 2 1/4 rake if I took out the coil spring spacers. But I cant do that until I get my new rims/tires because my current tires rub.