im rebuilding my '01 ram 8l v10 motor and im lookin for some internal performance parts like cam, lifters, rocker arms, and hardware like head bolts. because my plan is to build a motor that is pretty much bullet proof and im wantin to go all out but completely drain my bank account. but if any of yall know of any good performance parts that are available for me to get plz let me know!! and any other performance parts will work too!!

 

A stock V10 can do that all by itself.

 

this is very tru but my dad told me thought he doesnt feel like it doesnt have the amount of power that it should so thats y i want to add a few internal parts to boost the power so when i get rebuildin the motor it will feel like a completely whole new truck and he wont want to get rid of it!! so do you know of any??

 

Welcome to the world of the Mopar V10. Unfortunantly there isn't a lot of aftermarket upgrade options.
Guess you could do a bore and port and polish, but that's about it.
Please post up if you find something else for them though.

 

i found a cam, pushrods, and springs from comp cams but it says dodge v10 and viper v10! are the vipers cam they same as the 8 liter cam!?!?

 

You need to be careful there, I think that the v10 in your truck is not the same design as the SRT-10 motors.

 

i think so too kuz somethin jus dont seem right kuz i looked at the rpm ranges on the cams and one i think went a lil over 6 grand and you dont want the 8 liter to go over 5800! kuz then catastrophe happens!!

 

There is very little shared between the aluminum Viper V10 and the cast iron truck V10. The truck motor is a low RPM torque monster whereas the Viper is a high RPM horsepower demon.

 

thats wut i thougfht but i wasnt sure so do u think i can get a hold of at least a cam. springs, and rockers?

 

by far am i an v10 expert but i was under the impression that the viper v10 heads and the ram v10 heads were completely different, i was thinking about a few upgrades myself but i'm not looking to convert my torque monster ram v10 into a horse pounding viper v10, but msd has an ignition box (62152) which i seen on their website but i'm wondering if this is going to mess up the computer?