Just purchased and installed the skyjacker 2inch coil spacers and it is well worth the $125 my 01 ram sits just about as high as my buddys 99 f150 with 6 inches and 325's. If you are looking to level the front out it is perfect. Only took a couple of hours and only problem i had was the coils but i rented some coil compressers and finished it up no problem. Tought i would post this for reference to anyone who is looking to get a little more in the frontend.

 

Half the price and just as good.

https://dodgeforum.com/forum/2nd-gen...installed.html

 

I'm getting a 1" on top of the new 2" off road edition lift.

 

nice, now you should put bigger tires and some gears in it
im at 2 inches of lift and my 265s almost look a lil small

 

U got around 3k for me? If you do send it over now and the truck will be in the shop getting worked on.

 

i thought you picked up some major hours at work, at like 11 an hour, just save up

 

Yea but still. 12 hrs of ot is not enuff.

 

my 315's alredy rub on the upper control arm at full turn

 

i got killer back spacing so i can run 35 with no lift.

 

How much backspacing are you runnin and how would i measure that on my stock rims? or do you know the stock backspacing?