loud muffler
just do what sheriff showed us he did on the first page of this thread. gut a muffler and weld it on around the pipes.
I had a 79 Camaro V8 and the Cat & Exhaust all went bad so I took it all off and it sounded like crap with no pipes at all. What I did was take a universal cat and a bent pipe (facing down) and it sounded nice and mean after that. Since I did it myself and had no pipes (stuff was harder to get back then) it all ended right below the car at the back seat. I think you need at least a little back flow to get a nice even sound.
I had a cherrybomb extreme on my 3.1 liter monte carlo, it was ok. Its a 12 inch muffler and only had one chamber. The closest you can get to straight piped without being illegal.
You can whatever fits too! Lol. I have a FM 40 and going to put on a super 44 again, thats the loudest I think on my truck.
heres mine
http://www.flickr.com/photos/29654534@N05/3557594350/
i would embed it but no one has told me if you can from flickr yet.
if you're gonna do what i did you want to get a 12" sawzall blade or a big band saw because the baffles are stuck to the inside of the muffler case pretty good.
http://www.flickr.com/photos/29654534@N05/3557594350/
i would embed it but no one has told me if you can from flickr yet.
if you're gonna do what i did you want to get a 12" sawzall blade or a big band saw because the baffles are stuck to the inside of the muffler case pretty good.
I would go with a thrush muffler. They're like $25 or so. I would also say a Magnaflow. I had one of those on my Pathfinder 3.3L V6 and it sounded pretty nice as well as on my 3.8L Firebird. Flowmasters are ok. Glasspacks aren't bad and will basically turn into a straight pipe once the fiberglass breaks in. Until then, it's gonna sound like a quiet turd.
On a V8 you pretty much got all the options you need since the engines sound nice as it is. I got a dual inlet cat then 3" piping off the cat into a glasspack exiting on the side and it sounds ballsy.
On a V8 you pretty much got all the options you need since the engines sound nice as it is. I got a dual inlet cat then 3" piping off the cat into a glasspack exiting on the side and it sounds ballsy.
why so negative? you obviously don't like the cackle but a lot of people do.
Mines straight piped...doesn't sound like *** to me
http://http://www.youtube.com/watch?v=hl4q8xdqJug
http://http://www.youtube.com/watch?v=hl4q8xdqJug
Mines straight piped...doesn't sound like *** to me
Sorry..



