2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

help rust

Thread Tools
 
Search this Thread
 
Old Jul 30, 2009 | 10:12 PM
  #1  
breeves's Avatar
breeves
Thread Starter
|
Registered User
Joined: Oct 2008
Posts: 38
Likes: 0
From: Liberty NY
Default help rust

i, like many dodge owners are fighting rust. on the back corner of the cab between the cab and the bed, i have paint bubbles where water is trapped between the paint and the metal. i was told my a body guy/relative that i should drill weep holes along the bottom of the cab to help drain any water. but i have those rubber plugs all along the inside of the rockerpanels, would it help if i sprayed a rust inhibiter in there maybe to hold the rust at bay, seeing that its rusting from the inside out. Any help would be greatly apprecitated
 
Reply
Old Jul 31, 2009 | 01:58 AM
  #2  
dakotas ram's Avatar
dakotas ram
Champion
Joined: Jul 2008
Posts: 3,430
Likes: 2
From: NW Arkansas
Default

i dont think thats water trapped under the paint, its just the rust building up under there
 
Reply
Old Jul 31, 2009 | 05:04 AM
  #3  
olyelr's Avatar
olyelr
Record Breaker
Joined: Dec 2008
Posts: 2,032
Likes: 1
From: Elk Rapids, MI
Default

Yep, theres no magic to pull now... its already over. Go ahead and lightly push on the cab corner area with your finger, it may just go right through the body... mine did, and I didn't have have a single bubble, just nice shiny paint.
 
Reply
Old Jul 31, 2009 | 11:26 AM
  #4  
95MaroonMonster's Avatar
95MaroonMonster
Record Breaker
Joined: Jan 2009
Posts: 2,087
Likes: 0
From: Indiana
Default

mines rusted thru, gonna fix it this winter when i am home from college for a while
 
Reply
Old Jul 31, 2009 | 02:22 PM
  #5  
Ram15002ndGen's Avatar
Ram15002ndGen
Record Breaker
Joined: Jun 2009
Posts: 1,011
Likes: 0
Default

Originally Posted by olyelr
Yep, theres no magic to pull now... its already over. Go ahead and lightly push on the cab corner area with your finger, it may just go right through the body... mine did, and I didn't have have a single bubble, just nice shiny paint.
Sheeet that sounds just like dry rot or termite damage. Wood looks nice & even, then you poke it and your screwdriver goes all the way through. I hate it when that happens. Rust is a bear to deal with. Probably gonna have to cut a piece out and weld some new metal on. Kinda the same you have to do with wood. Surgery is the only cure in these cases.
 
Reply
Old Jul 31, 2009 | 03:02 PM
  #6  
Sheriff420's Avatar
Sheriff420
Grand Champion
Joined: Apr 2008
Posts: 7,055
Likes: 7
From: Lee County, North Carolina
Default

just break out a grinder/dremel tool and make a day of rust removal then spray paint it.
 
Reply
Old Jul 31, 2009 | 04:41 PM
  #7  
olyelr's Avatar
olyelr
Record Breaker
Joined: Dec 2008
Posts: 2,032
Likes: 1
From: Elk Rapids, MI
Default

Originally Posted by Sheriff420
just break out a grinder/dremel tool and make a day of rust removal then spray paint it.

That's the problem though. Once the bubbles start showing through its too late cause it rusts from the inside out at the cab corner. There is nothing behind it but rust, and when you remove it, well, there's nothing left but a hole.

It a pretty easy fix for a body man. All I did was have a guy cut the rust out, and weld in a new cab corner. He made it look easy, but I know better than that.
 
Reply
Old Jul 31, 2009 | 06:32 PM
  #8  
98BlueSport's Avatar
98BlueSport
Professional
Joined: Nov 2008
Posts: 181
Likes: 0
From: Michigan
Default

A wise man once told me, "Rust never sleeps". and i believe him
 
Reply
Old Jul 31, 2009 | 10:19 PM
  #9  
breeves's Avatar
breeves
Thread Starter
|
Registered User
Joined: Oct 2008
Posts: 38
Likes: 0
From: Liberty NY
Default

i know its not rust becasue i poked a hole in the bublbe and water came out. and the panel is still sturdy.
 
Reply
Old Jul 31, 2009 | 11:29 PM
  #10  
Ram15002ndGen's Avatar
Ram15002ndGen
Record Breaker
Joined: Jun 2009
Posts: 1,011
Likes: 0
Default

You obviously have water getting in somewhere. Water normally does not get in behind paint. The weep hole idea may not be a bad one. Why don't you pull you carpeting back and see what's up in there, or look at it from under the cab and see what you can learn?
 
Reply



All times are GMT -4. The time now is 12:00 PM.