Ok so I rewired the last 3 of the cab lights. Now only the one in the center works!!! The crimps went throw the wires. I could see that nice copper color... Now what!!!!!!!!

 

Are you wiring these in series or parrallel?

 

One after another right down the line.

 

I am guessing it's a ground issue. Did you try to run a dedicated ground to test each one?

 

I ran the ground to the battery to see if they worked.

 

we have the same lights then, IIRC they are navigator

 

man if your running you power wire from far end over, and using the wire taps and they aint workin its GOT to be ground i just dont see how it could be anything else,

 

i have a 3rd gen recon wiring harness im looking at, and it has a common ground for all 5 lights

i would recheck your wires, double check you didn't cross any, especially if you used one color for both power and ground

 

If someone asked you to wire something for them and you know they have tried. Is it wrong to ask for a pic to see what you may be dealing with or to say your doing it wrong try it this way?

I just want some opnions on this beings it seems to be such a horrible thing to ask some people

 

Try running a dedicated hot wire from the battery then. Maybe you are using poor power source. If that's not it I'm stumped.