2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Hi, newbie here!

Thread Tools
 
Search this Thread
 
  #11  
Old 10-05-2009 | 11:43 AM
95RAM360's Avatar
95RAM360
Grand Champion
Joined: Aug 2009
Posts: 5,971
Likes: 45
From: MAINE
Default

Originally Posted by RedNeck4Sure
The ford above is a picture of a truck I use to own. I also had issues with my ford. (Bad Compression in cylinder 3) yeah I sold it and got a DODGE.

very wise desicion
 
  #12  
Old 10-05-2009 | 12:39 PM
Aubrey's Avatar
Aubrey
Record Breaker
Joined: Dec 2006
Posts: 1,366
Likes: 1
From: Englewood, CO
Default

Check your spring hanger welds to the frame up front. You have the dual shock setup on an earlier model and those will tear if you're not careful. I've had to weld and reinforce mine. I nearly ripped off both spring buckets on a trail a couple years back.
 
  #13  
Old 10-05-2009 | 02:10 PM
dakotas ram's Avatar
dakotas ram
Champion
Joined: Jul 2008
Posts: 3,430
Likes: 2
From: NW Arkansas
Default

never noticed it was a long box, looks good tho.......my g/f had an 01 f150, pretty beasty, but we were scared to change the plugs in it due to the whole sparkplug blowout deal
 
  #14  
Old 10-06-2009 | 01:52 AM
Ramman18's Avatar
Ramman18
Champion
Joined: Feb 2007
Posts: 3,103
Likes: 108
From:
Default

What the hell???? My post was deleted???
 
  #15  
Old 10-06-2009 | 02:06 AM
Laramie1997's Avatar
Laramie1997
Grand Champion
Joined: Sep 2008
Posts: 6,980
Likes: 4
From: Springfield MO
Default

^ There is only one deleted post in this thread, and it was one of yours. It was a double post, so either you posted twice with out meaning to, or you posted two posts that had mostly the same content in them.
 
  #16  
Old 10-06-2009 | 09:35 AM
RedNeck4Sure's Avatar
RedNeck4Sure
Thread Starter
|
Registered User
Joined: Jun 2009
Posts: 27
Likes: 0
Default

I haven't even got the title transfered yet.. I'm waiting for a install on windshield this morning so I can pass the Sherriffs inspection since it was an out of state vehicle. As soon as I get it licensed Im going up the road to the creek. There is some good mud holes up there.. I will try to get some pictures
 
  #17  
Old 10-06-2009 | 12:05 PM
Ramman18's Avatar
Ramman18
Champion
Joined: Feb 2007
Posts: 3,103
Likes: 108
From:
Default

Originally Posted by Laramie1997
^ There is only one deleted post in this thread, and it was one of yours. It was a double post, so either you posted twice with out meaning to, or you posted two posts that had mostly the same content in them.
Nope. I posted one post two days ago between post 7 and 8 and now its gone. I read it again the next morning and there was only one there. I think it was deleted because somebody didn't like it.
 
  #18  
Old 10-06-2009 | 01:03 PM
BIGRED97's Avatar
BIGRED97
Captain
Joined: Sep 2007
Posts: 622
Likes: 0
From: Houston, TX
Default

Why did you trade in the SS/T?
 
  #19  
Old 10-06-2009 | 01:42 PM
Miami_Son's Avatar
Miami_Son
Banned
Joined: Apr 2009
Posts: 2,816
Likes: 4
From: Los Angeles, CA
Default

Originally Posted by Ramman18
Nope. I posted one post two days ago between post 7 and 8 and now its gone. I read it again the next morning and there was only one there. I think it was deleted because somebody didn't like it.
You're right. It had bad info in it that didn't need to be spread. Simple as that, nothing personal.
 
  #20  
Old 10-06-2009 | 02:09 PM
Ramman18's Avatar
Ramman18
Champion
Joined: Feb 2007
Posts: 3,103
Likes: 108
From:
Default

Uhhh, what bad info?? Would you please enlighten me as to what I said that was "bad info"? All I wrote was that this website will sometimes automatically double post my responses. Not my fault. Not your fault. Where's the bad info? Why not just PM me and explain? Why simply delete an entire post? Very prosaic move on your part. I'm sure this will be deleted by tonight too.
 


Quick Reply: Hi, newbie here!



All times are GMT -4. The time now is 05:07 AM.