is it glued at the pass. side?

when i tried to take mine out (to get painted and had no cracks) i cracked it #1 an #2 the part over the glove box would not come undone. i couldnt find any bolts. so this means its glued?

i just went and put it back in because i couldnt figure it out....now its cracked....and before there was not 1 crack

There shouldnt be any glue. Mine was only bolted in.

how did you get the pass. side out. i saw a bolt that i had to reach through the cd player area to get (under the dash) and one in the middle. still it would not separate on the Pass. side (yes i got the bolt on the outside where you have to open door)

You have to remove the airbag. Then there is screws behind the airbag that hold the dash in place

aaaahhhhh i seee

If you want more info on it let me know. I'll pm you pics and that part of the write up.
I haven't posted anything cause I don't want a half done diy

yea if you dont mind sending me the pics for the pass. side. i know how to take everything else apart, just dont know how to get the airbag out of the way so i can get those bolts out.

I'd like to see pics of this as well. Are you guys getting your replacement dashes from the dealer or elsewhere?

YES, I'd like to see photos posted.

This was one of those on-again, off-again projects of mine. After having to explain the reasons behind the trashy dash pad vs. the well kept vehicle to my windshield installer last week it's kinda starting to be an on-again thing now.

Smack the bumper real good and it'll pop out quickly.