My Rebuild Thread
no reason for fights peeps...
i hav always used Lucus, and since ive used it ive never had an engine blow. i had a 2.2L Sunfire that had 212K when i sold it, original motor, and still ran excellent. had an Olds. Cierra 3.1L didnt use Lucus, and the motor blew at 75K, i bought it at 59K
Pontiac Grand Am 2.4L Motor blew, didnt use Lucus (blew first day i had it) at 158K
Nissan Pickup 2.4L always used Lucus, and the truck ran excellent, and i beat the living $h!t out of it when i went mudding almost every other day. always ran good.
Then i have my Dodge 5.9L which currently has 195821 miles ive used Lucus since i bought it, and the previous owner always used lucus, and the motor runs excellent.
All in all my experiances with Lucus have all turned out good. Maybe its just a coincidence that the motors without lucus blew and the other ones didnt.
but now im NOT running lucus for i want to see if theres a change.
i hav always used Lucus, and since ive used it ive never had an engine blow. i had a 2.2L Sunfire that had 212K when i sold it, original motor, and still ran excellent. had an Olds. Cierra 3.1L didnt use Lucus, and the motor blew at 75K, i bought it at 59K
Pontiac Grand Am 2.4L Motor blew, didnt use Lucus (blew first day i had it) at 158K
Nissan Pickup 2.4L always used Lucus, and the truck ran excellent, and i beat the living $h!t out of it when i went mudding almost every other day. always ran good.
Then i have my Dodge 5.9L which currently has 195821 miles ive used Lucus since i bought it, and the previous owner always used lucus, and the motor runs excellent.
All in all my experiances with Lucus have all turned out good. Maybe its just a coincidence that the motors without lucus blew and the other ones didnt.
but now im NOT running lucus for i want to see if theres a change.
LISTEN POINDEXTER!!! I do mean to be an "A$$", 'an if I get kicked off this forum...I'll fly down to Louisiana, (too much inbr
**ding/ hotsauce I think), I've rebuilt 36+ motors..complete and you don't need graghs and numbers, 'an frick'in charts to show scoring on cylinder walls,..all I can say is, (I get my 226 ib. self a little too riled up when people doubt true and blue testing for "package label reading"??? come on now boy....you need ya self sum "POON"!!!..... oh yeah,..CMCKENNA, I'm also a certified mechanical engineer,...u want me fax U my diploma?
**ding/ hotsauce I think), I've rebuilt 36+ motors..complete and you don't need graghs and numbers, 'an frick'in charts to show scoring on cylinder walls,..all I can say is, (I get my 226 ib. self a little too riled up when people doubt true and blue testing for "package label reading"??? come on now boy....you need ya self sum "POON"!!!..... oh yeah,..CMCKENNA, I'm also a certified mechanical engineer,...u want me fax U my diploma?
For someone with a "diploma" you sure missed the 101 classes on English and technical writing for starters. Your writing makes you appear as an uneducated, illiterate person in my opinion. You must have been absent that day.
Last edited by cmckenna; Dec 7, 2009 at 02:06 PM.
this is getting way outta control...
aint nobody flyin nowhere...this is a discussion forum, if you challenge someone on a website that you dont even know, that would entitle you to be a b!tch and nothin but a $h!t talker IMO
and im not directing to anyone
aint nobody flyin nowhere...this is a discussion forum, if you challenge someone on a website that you dont even know, that would entitle you to be a b!tch and nothin but a $h!t talker IMO
and im not directing to anyone
LISTEN POINDEXTER!!! I do mean to be an "A$$", 'an if I get kicked off this forum...I'll fly down to Louisiana, (too much inbr
**ding/ hotsauce I think), I've rebuilt 36+ motors..complete and you don't need graghs and numbers, 'an frick'in charts to show scoring on cylinder walls,..all I can say is, (I get my 226 ib. self a little too riled up when people doubt true and blue testing for "package label reading"??? come on now boy....you need ya self sum "POON"!!!..... oh yeah,..CMCKENNA, I'm also a certified mechanical engineer,...u want me fax U my diploma?
**ding/ hotsauce I think), I've rebuilt 36+ motors..complete and you don't need graghs and numbers, 'an frick'in charts to show scoring on cylinder walls,..all I can say is, (I get my 226 ib. self a little too riled up when people doubt true and blue testing for "package label reading"??? come on now boy....you need ya self sum "POON"!!!..... oh yeah,..CMCKENNA, I'm also a certified mechanical engineer,...u want me fax U my diploma?
Dont act my age.
If that's the child like info bashing people.....I'm outta here,..you dumb sucka!
Last edited by PurplDodge; Dec 7, 2009 at 03:15 PM.
Take some breaths guys... I dont want to see this escalate any farther. Heated discussions are okay but when name calling begins, the fun ends. So relax, crack a cold one and keep discussing in a mature manner.
I have worked for Boeing Space and Satellite and have contracted for Raytheon Missile Systems, Raytheon Space and Airborne and have worked on projects involving Lockheed, General Dynamics, Goodrich and GE, Crane Aerospace, Aerovironment as a Sr Engineer making unmanned aircraft
what type of work have you done for those companies (in general, like electrical systems/body design/fuel systems etc...)
Actually I've just been writing that way to fool around,..I was born in Finland, went to University here in Canada, and live in Canada. If you hadn't noticed...I went back and changed my write up. Also,..I was just mad and excerpted 1 or 2 qualifications,...I didn't blurt out my whole resume....you know what they say,..."The ones who show off with all their might,....usually are all talk and can't back it up". It's been a delightful journey playing grade 3 wrestling of the minds with you,..but I'm going to go get me some "POON" now,... chow. *(p.s: Peace.....I have a habit of taking it too serious when someone says I'm full of sh*t or just following the label.... sorry guys,..don't want to be an a$$)
Last edited by Dodge.Ismo; Dec 7, 2009 at 05:03 PM.



