When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I found some at my local Dodge dealer. But you have to have a rivet gun. They have a replacement you just push in then they open up on the other side but they wanted $4 bucks a piece. There has to be someplace on line that sells that kind of hardware.
Napa carries the clips. They won't be on the shelf but they are in their books and they can order them. Bring in a sample so they can compare it to whats in the books.
you can also use 1/4" bolts about 1/2 - 3/4" long, nuts, washers. i bolted mine to reduce flopping and squeaking.
That's what I did too.
Originally Posted by rhaibeck
I found some at my local Dodge dealer. But you have to have a rivet gun. They have a replacement you just push in then they open up on the other side but they wanted $4 bucks a piece. There has to be someplace on line that sells that kind of hardware.
Did you find this thread through the search? It's been dead for quite some time.
