not sure if anyone knows, but im in the middle of the plenum fix/keggar mod, and im putting everything back, but i had a few snags, broke a bolt on the front left, coolant sensor broke and the connector for it fell apart, i replaced the sensor, and im working on getting that bolt out, but i was wondering if dodge used the same sensor on other vehicles, the junk yard near me has some rams but no engines and i need to get that connector and splice it onto my harness

 

Sensor or sender?

Ya, I had the opposite side broke on me. I PB blast it overnight and still would not budge, torch it and still would not budge, then I gave it a love tap from a mini sledgehammer sucker finely moved.

 

take the part # and do a search for it and see if it pops up for any other vehicles...... rams and durangos should have the same sensor, prob even on the v6s

 

They might be the same on some dodge vehicles but make sure wear the connecter plugs into it, make sure it has 2 prongs,2 metal tabs, if theres 1 it will not work

 

Here you go friend:

Dodge
1992 - 1994 B150
1994 - 1998 Ram 1500
1995 - 1998 B1500
1999 - 2003 Ram 1500 Pickup
1992 - 1994 B250
1999 - 2003 Ram 1500 Van
1995 - 1998 B2500
1994 - 1998 Ram 2500
1992 - 1994 B350
1999 - 2003 Ram 2500 Pickup
1995 - 1998 B3500
1999 - 2003 Ram 2500 Van
1996 - 1999 Caravan
1994 - 1998 Ram 3500
1992 - 1993 D150
1999 - 2003 Ram 3500 Pickup
1992 - 1993 D250
1999 - 2003 Ram 3500 Van
1992 - 1993 D350
1992 - 1993 Ramcharger
1992 - 2003 Dakota
1992 - 1993 W150
1998 - 2003 Durango
1992 - 1993 W250
1996 - 1999 Grand Caravan
1992 - 1993 W350

Jeep
1993 - 1998 Grand Cherokee
1991 Grand Wagoneer

Plymouth
1996 - 1999 Grand Voyager
1996 - 1999 Voyager