Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Dodge Ram 2nd, 3rd, 4th Gen Top Comfort Modifications
Overview of popular modifications to customize your Ram.
Browse all: General Overview
mods on the inside
for me i panted the sill plates black with bed liner and that little pice at the buttom center of the dash that says srs black also with bed liner. plane on doing the head consoule(idk wht its called but the one thats above the rear view mirrior) black also.
Miami
Curious how your headliner is after pulling it down & putting it back up?
Heres mine, I smoothed the overhead console, gauge bezel, door pulls & pwr control on the doors. The rest I left textured. Had issues with the overhead & the airbag control box. The paint caused the adhesion promoter to react, took a couple tries to get it to work. Also did my SS mirrors & the ext door handles at the same time. Put the race buckets in back in 01, used manual pedestals from an 98 cause I didnt want to cut up the power ones.

Curious how your headliner is after pulling it down & putting it back up?
Heres mine, I smoothed the overhead console, gauge bezel, door pulls & pwr control on the doors. The rest I left textured. Had issues with the overhead & the airbag control box. The paint caused the adhesion promoter to react, took a couple tries to get it to work. Also did my SS mirrors & the ext door handles at the same time. Put the race buckets in back in 01, used manual pedestals from an 98 cause I didnt want to cut up the power ones.

Trending Topics
You have to drop the glovebox. Theres a few bolts and a plug holding it in, I believe. It was much easier to pull it out while I had my dash out for the heater core.
Yeah, I was concerned about taking it down after reading some horror stories about disintegrating headliners, but I was careful with it and it came out/went back in fine. Even shampooed it while it was out. It is somewhat delicate, though.





