2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Truck Cranks but wont fire

Thread Tools
 
Search this Thread
 
Old Mar 30, 2010 | 01:16 PM
  #1  
cougardoug's Avatar
cougardoug
Thread Starter
|
Rookie
Joined: May 2008
Posts: 50
Likes: 0
From: State College PA
Default Truck Cranks but wont fire

I have a 99 ram 4x4 with a 318. I went to leave today and my truck wont turn over. It will crank all day long though. All the electronics are working and the fuel pump and starter are fine. It did the same thing to me about 2 months and i changes the coil pack (ignition coil) and the plug that runs from the distributor to the coil pack. And i was back in business. It has the same signs and symptoms today. The truck ran fine 2 days ago and it did rain last night. Could there be moisture in the distributor? Or could it be something else? I need it fixed asap. Any advice would be great.
 
Reply
Old Mar 30, 2010 | 04:23 PM
  #2  
xxxcowxboyxxx's Avatar
xxxcowxboyxxx
All Star
Joined: Jan 2010
Posts: 934
Likes: 0
From: scranton, Pa
Default

i would start with a new cap and rotor....sounds like a no brainer if everything else is working like you said. did you check to see if your getting spark from the coil?
 
Reply
Old Mar 30, 2010 | 06:58 PM
  #3  
95RAM360's Avatar
95RAM360
Grand Champion
Joined: Aug 2009
Posts: 5,971
Likes: 45
From: MAINE
Default

does it have spark?
 
Reply
Old Mar 30, 2010 | 07:48 PM
  #4  
wjxavier's Avatar
wjxavier
Record Breaker
Joined: Feb 2009
Posts: 1,140
Likes: 3
From: Fredericksburg, VA
Default

it rained the other night here too, and my truck did the exact same thing...it was weird because its NEVER done it to me EVER. but i think it had something to do with the rain as well.
 
Reply
Old Mar 31, 2010 | 03:55 PM
  #5  
zman17's Avatar
zman17
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Default

Unscrew the pre cat 02 sensor and see if it starts.
 
Reply




All times are GMT -4. The time now is 01:35 PM.