2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

"Dodge Lean" pic

Thread Tools
 
Search this Thread
 
Old May 23, 2010 | 07:56 PM
  #1  
DukesOfHazzard's Avatar
DukesOfHazzard
Thread Starter
|
Record Breaker
Joined: Feb 2010
Posts: 1,034
Likes: 0
Default "Dodge Lean" pic

can you guys tell , it seems alot worse in person, its off 1 inch in the rear and 1.5+ inch in the front all on drivers side,compared to the pass side. tire pressures good, 3/4 tank gas. I think jasonw chased this around and replaced the springs?? Did you do front and back or just rear leafs?
 
Reply
Old May 23, 2010 | 08:20 PM
  #2  
PurplDodge's Avatar
PurplDodge
Legend
Joined: Jan 2008
Posts: 8,321
Likes: 12
From: Indiana
Default

My tank is always empty, so I dont have that problem.
 
Reply
Old May 23, 2010 | 11:12 PM
  #3  
canada_rokzz's Avatar
canada_rokzz
Rookie
Joined: Aug 2009
Posts: 89
Likes: 1
From: Selkirk Manitoba Canada
Default

Mine had that, but it was an obviously broken spring... Fixed that today!

Ever consider Air Ride helper type springs? Just keep em on seperate schrader valves and run em at different pressures.
 
Reply
Old May 23, 2010 | 11:15 PM
  #4  
2k10HemiRam's Avatar
2k10HemiRam
Captain
Joined: Jun 2007
Posts: 520
Likes: 1
From: Las Vegas, NV
Default

That looks crazy.
 
Reply
Old May 24, 2010 | 12:01 AM
  #5  
DukesOfHazzard's Avatar
DukesOfHazzard
Thread Starter
|
Record Breaker
Joined: Feb 2010
Posts: 1,034
Likes: 0
Default

I've considered a few different options ,b ut in the end i'll prob just go with replacement leafs, and coils all around.
 
Reply
Old May 24, 2010 | 12:07 AM
  #6  
BlueBeast2's Avatar
BlueBeast2
Champion
20 Year Member
Photogenic
Photoriffic
Shutterbug
Joined: Jul 2005
Posts: 2,966
Likes: 3
From: Greeneville, TN
Default

fatass!
 
Reply
Old May 24, 2010 | 12:24 AM
  #7  
DukesOfHazzard's Avatar
DukesOfHazzard
Thread Starter
|
Record Breaker
Joined: Feb 2010
Posts: 1,034
Likes: 0
Default

Originally Posted by BlueBeast2
fatass!
lol and thats not even with me in it, 6'1 250 lbs
 
Reply
Old May 24, 2010 | 12:28 AM
  #8  
GeorgiaDodge's Avatar
GeorgiaDodge
Veteran
Joined: Mar 2010
Posts: 323
Likes: 0
From: North Georgia
Default

gangsta leanin
 
Reply
Old May 24, 2010 | 12:42 AM
  #9  
dodge15004x45.9's Avatar
dodge15004x45.9
Legend
Joined: Nov 2008
Posts: 7,950
Likes: 2
From: Malvern Pa - Canadensis Pa
Default

New leafs it is. Don't let anyone try to sell you on re-arcing the leafs it wont last.
 
Reply
Old May 24, 2010 | 12:50 AM
  #10  
2k10HemiRam's Avatar
2k10HemiRam
Captain
Joined: Jun 2007
Posts: 520
Likes: 1
From: Las Vegas, NV
Default

Yea, I'd go with new coils and leafs. Wouldn't mind replace mine but I gotta wait till I'm ready to lift my truck.
 
Reply



All times are GMT -4. The time now is 07:18 PM.