Help on how to replace my Power-Lock?
Thread Starter
|
Captain
Joined: Dec 2006
Posts: 509
Likes: 1
From: Midlothian, IL.
Help on how to replace my Power-Lock?
The pass-side stopped working,..
Not all the way. But it will only move up or down
just a little bit. Figure it's time to replace,.. I have
only one problem,... I don't know how. Any help?
'96 ext cab, 4x4, 360.
Not all the way. But it will only move up or down
just a little bit. Figure it's time to replace,.. I have
only one problem,... I don't know how. Any help?
'96 ext cab, 4x4, 360.
Hall Of Fame
Joined: Jul 2006
Posts: 12,204
Likes: 10
From: Gainesville, Ga.
well, i've never replaced one, but i'd guess it'd be like getting at the speaker -
about 3 screws - door handle cup, and up next to the mirror. then pop the panel loose from the door. i recommend getting the $10 door panel tool at any parts store. it will pop the clips without breaking anything. then lift it up and inward.
about 3 screws - door handle cup, and up next to the mirror. then pop the panel loose from the door. i recommend getting the $10 door panel tool at any parts store. it will pop the clips without breaking anything. then lift it up and inward.
