Ramingo I would be more than happy to have your help.I'm trying to track down a engine hoist. No interest in my truck so I'm going to try pulling the motor and seeing what i can do. Shoot me a text and e will get together sometimes i get to focused add can't see the easy solution right in front if me.

 

Glad to hear you are pushing through the suck and gonna get it done. Been doing a lot of thinking lately about what motor my truck should get and I have to say the hemi idea is kinda tempting...

 

carbed 572 thats what u need lol

 

^^ I will assume that you mean a 572 hemi and not the chevy motor.

As cool as that would be in a show rig, I want to keep the thing driveable... And within a workin' man's budget

 

deffinatly the hemi and i have a jeep and a ram so good fuel millage isnt in my vocab

 

I didn't say anything about MPG's haha, just ruled out a $14K motor lol.

 

I lowered my asking price to 3k. I just need this truck gone. Removing the crank is over my head and ability as far as tool access goes. I also was told i have no more funds to spend on This "money pit" my wife says i put money into it but it doesnt help fix the problem. She is over it and i can't really blame her.

 

Sorry to hear that. Good luck selling it.

 

So all it needs is the broken/cross-threaded bolt removed from the crank? You have nothing to loose and everything to gain by fixing this yourself, center punch, drill, good drill bits, bigger ez out, drill 75% of that bolt out. Give it a shot you might just win.

 

Too bad you are not closer to me. I have everything you would need for that job except a new bolt.