DodgeForum.com

2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

fog lights

Thread Tools
 
Search this Thread
 
Old Aug 18, 2010 | 01:43 PM
Share
  #1  
usna86's Avatar
usna86
Thread Starter
|
Registered User
Joined: Aug 2010
Posts: 4
Likes: 0
Default fog lights
Any one know where I can get OEM fog light kit (and installation instructions) for my 98 Ram 2500?
 
Reply
0
Old Aug 18, 2010 | 03:18 PM
Share
  #2  
97r/tram's Avatar
97r/tram
Veteran
Joined: Jul 2009
Posts: 467
Likes: 0
From: Jefferson Ga
Default
Youd be better off with a set of aftermarket lights in the factory holes on your bumper..that is if your truck came with factory fog lights.
 
Reply
0
Old Aug 18, 2010 | 03:47 PM
Share
  #3  
greenmachine's Avatar
greenmachine
All Star
Joined: Mar 2005
Posts: 820
Likes: 0
From: Jax Fl.
Default
I installed a factory kit (wiring, push button switch, and lights) in my 96 for appx 200 from the dealer.
 
Reply
0
Old Aug 18, 2010 | 03:48 PM
Share
  #4  
dodgeram07's Avatar
dodgeram07
Champion
Joined: Mar 2008
Posts: 3,363
Likes: 1
From: ohio
Default
you can get nice ones form rock auto
 
Reply
0
Old Aug 18, 2010 | 03:49 PM
Share
  #5  
mjackson92rs's Avatar
mjackson92rs
Professional
Joined: Jun 2008
Posts: 172
Likes: 0
From: Plymouth PA
Default
What I did is I bought just the OEM fog lights off of a vendor online (forget where, they are readily available) and made up my own wiring harness for the lights. Below is the tread on what I did.

https://dodgeforum.com/forum/2nd-gen...-retrofit.html
 
Reply
0
Old Aug 19, 2010 | 03:44 PM
Share
  #6  
mjonesjr's Avatar
mjonesjr
Professional
Joined: Jul 2010
Posts: 224
Likes: 0
From: Salem, IN
Default
Originally Posted by greenmachine
I installed a factory kit (wiring, push button switch, and lights) in my 96 for appx 200 from the dealer.
You don't know the part number you bought from the dealer do you?
 
Reply
0
Old Aug 19, 2010 | 04:10 PM
Share
  #7  
HammerZ71's Avatar
HammerZ71
Administrator
Joined: Jul 2007
Posts: 24,686
Likes: 21
From: South Georgia/East Florida
Default
$59 per side at LMC Truck...

http://www.lmctruck.com/icatalog/de/full.aspx?Page=63
 
Reply
0

Trending Topics

Old Aug 19, 2010 | 06:45 PM
Share
  #8  
southern13guy's Avatar
southern13guy
Rookie
Joined: Sep 2008
Posts: 54
Likes: 0
From: Florida
Default
Or $33 per side from here, I bought a set from them a while back.
http://www.amazon.com/dp/B002JBSOM4/...SIN=B002JBSOM4
 
Reply
0
Old Aug 19, 2010 | 07:30 PM
Share
  #9  
kissmymagnum's Avatar
kissmymagnum
Professional
Joined: Feb 2010
Posts: 105
Likes: 0
From: Lincolnton, N.C.
Default
eBay is where I got my set from, had the wiring with it as well if your truck didn't come with it factory.
 
Reply
0
Old Aug 20, 2010 | 11:45 AM
Share
  #10  
greenmachine's Avatar
greenmachine
All Star
Joined: Mar 2005
Posts: 820
Likes: 0
From: Jax Fl.
Default
I dont but dealer can look it up for you easily.
 
Reply
0
Back to Subforum
2nd Gen Ram Tech
View Next Unread
Low RPM hesitation at around 45mph and 1200-1400 rpm




Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -4. The time now is 03:35 AM.