my dad 2001 needs axle seal and i was if there was a diy for it. i tired searching for it but didnt come up with anything. and all the haynes manual said is to take it to a dealer

 

Besides this https://dodgeforum.com/forum/2nd-gen...-gen-rams.html There is 9 million threads here on that subject.

 

alright well one thing i dont understand were is the seal on the passenger side ik the driver side one is behind the carrier bearings

 

its in the CAD housing....ive done my axle seals twice, and have pics in a thread ive posted....any questions you have let us know.

 

drivers side is at the inside of the pumpkin, and requires removal of the carrier.
passenger side is at the outside edge of the CAD.

both require a seal pulling or driving tool. i used threaded rod on both. there is a little bit of room to swing a hammer on drivers side. NO ROOM on passenger side.

http://www.pavementsucks.com/tech-article-3.html

 

how do i install the passager side axle seal? and pics would be nice