2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Evaporator replaced

Thread Tools
 
Search this Thread
 
Old Nov 10, 2010 | 06:30 AM
  #1  
redseal's Avatar
redseal
Thread Starter
|
Rookie
Joined: Dec 2009
Posts: 82
Likes: 0
From: winter haven, fl
Default Evaporator replaced

Just replace the evaporator and heater core. For those that are needing to do this, refer to this thread.... https://dodgeforum.com/forum/2nd-gen...placement.html

I bought my parts from Rock Auto and spent $143 for the evap, and heater core shipped to my door.
The local dealer quoted me $1200 to do this job. It was a pain in the butt. Deffinately worth doing it yourself though.

Make sure to have 10 and 11mm deepwell sockets. To get the heater hoses off, just take a pliers and sqeeze where it hooks up to the core. They are very stubborn. Only do this if you are replacing your core as it bends the ends.
Plan on it taking up the better part of a day to do.
 
Reply




All times are GMT -4. The time now is 11:40 PM.