I found a 1999 3/4 transfer case that came out of a diesel, with a cracked a case, would those parts flop in to my transfer case

 

nope. not enough room.

 

Stop wasting your time, just replace the 231 and don't beat the crap out of your truck and you"ll be fine.

 

what size socket do i need to be able to remove the bolt that is on the back of the transfer case that hooks up to the 4x4 mini drive shaft, trying to take out the chain in the transfer case

 

Were a good place to get hard parts in the transfer case

 

were is a good place to get the hard parts i need

 

Here's a page with great info on our transfer cases and the real differences between each.
http://dodgeram.org/tech/specs/tranfer_case.htm

I'm lucky enough to have the 231HD on my truck, but as you can see, even that doesn't compare to a 241 overall.

By the way, this came from here. If you don't already have this bookmarked, you should.
http://dodgeram.org/tech/specs/Ramspecs.htm

 

I need a 6 Pinion Planetary Gear,

 

I have a 3pin gear, what is there for upgrades here

 

NP241 transfer case out of the same year 3/4 ton truck.