2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

96 v 10 2wheel/vs4wheel diference

Thread Tools
 
Search this Thread
 
Old Jan 25, 2011 | 02:58 AM
  #1  
ternadorex's Avatar
ternadorex
Thread Starter
|
Registered User
Joined: Jan 2011
Posts: 6
Likes: 0
Default 96 v 10 2wheel/vs4wheel diference

Have a 99 1500 4wd and ran across a 96 v10 auto 2wd. Is there any difference in the 2w vs 4w transmissions. in other words will this 96 2wd v10 and tranny be a candidate for a swap into my truck.
 
Reply
Old Jan 25, 2011 | 07:15 AM
  #2  
dhvaughan's Avatar
dhvaughan
Hall Of Fame
Joined: Jul 2006
Posts: 12,204
Likes: 10
From: Gainesville, Ga.
Default

no.
2wd and 4wd have different tailhousing/output shafts that are not easily swapped.
also the 1500 46re/rh is different from the V10/2500 47re/rh.
and also any pre-98 probably? won't fit the electrical part of your 99. i'm not sure about this but beware. you can search in MonteC's thread and others for interchange info.
 
Reply
Old Jan 25, 2011 | 06:53 PM
  #3  
ternadorex's Avatar
ternadorex
Thread Starter
|
Registered User
Joined: Jan 2011
Posts: 6
Likes: 0
Default

That's what I figured thanks
Will keep looking for a newer v 10
 
Reply
Old Jan 26, 2011 | 01:46 AM
  #4  
99dodge318's Avatar
99dodge318
Record Breaker
Joined: Mar 2010
Posts: 1,169
Likes: 0
From: Texas
Default

why are you looking for a v10 tranny if you have a half ton?
your front suspension wont be able to hold the weight of the 8.0l, and the torque would probably twist your frame rails.
 
Reply




All times are GMT -4. The time now is 02:38 PM.