Purchasing Ball Joints
Record Breaker
Joined: Jan 2010
Posts: 1,048
Likes: 1
From: Wisconsin
I have beaten this topic to death but here goes again (when will this info get into the FAQ's?). The 7400# GVW light duty 2500 has an 8-lug Dana 44 and an 8-lug Chrysler 9.25 HD. If the truck is 8800GVW it has dana 60's (with V8).
Grand Champion
Joined: Nov 2004
Posts: 6,099
Likes: 6
From: Colorado
I personally have never seen a 2500 that didn't have a Dana 60 in the front or a Dana 60, 70, or 80 in the rear. I wonder how common the LD trucks are, production numbers wise, for those 2 years.
Last edited by Silver_Dodge; Feb 3, 2011 at 10:23 PM.
Thread Starter
|
Professional
Joined: Jan 2011
Posts: 124
Likes: 0
From: Christiansburg,va
just looked at the door. I've got 7400 lbs so guess that means Dana 44 front and light duty! Guess that means that my truck is not quite the beast I thought it was! That's ok. It's good enough for me and hauling wood!!!
Record Breaker
Joined: Jan 2010
Posts: 1,048
Likes: 1
From: Wisconsin
You are correct, but this is only true for '94 and '95. After that, they where all HD.
I personally have never seen a 2500 that didn't have a Dana 60 in the front or a Dana 60, 70, or 80 in the rear. I wonder how common the LD trucks are, production numbers wise, for those 2 years.
I personally have never seen a 2500 that didn't have a Dana 60 in the front or a Dana 60, 70, or 80 in the rear. I wonder how common the LD trucks are, production numbers wise, for those 2 years.
They are rare beasts. I have personally seen only two, one at a junkyard and the other I almost bought as a parts truck.
