2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

belt Squealing

Old Feb 5, 2011 | 11:26 AM
  #11  
Silver_Dodge's Avatar
Silver_Dodge
Grand Champion
Joined: Nov 2004
Posts: 6,099
Likes: 6
From: Colorado
Default

I once had that happen, and it was the gator back belt. As soon as I switched to an OEM belt, it worked fine from that point on.
 
Reply
Old Feb 5, 2011 | 12:49 PM
  #12  
king_moaoe's Avatar
king_moaoe
Thread Starter
|
Rookie
Joined: Nov 2010
Posts: 71
Likes: 0
Default

humm, so think napa would have better belts? i bought my dayco from autozone
 
Reply
Old Feb 5, 2011 | 12:53 PM
  #13  
zman17's Avatar
zman17
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Default

I use Gates myself. I would get a wire brush and some break clean to clean things up before installing a new belt. The pad you used won't get down into the ribs.
 
Reply
Old Feb 5, 2011 | 03:27 PM
  #14  
Sheriff420's Avatar
Sheriff420
Grand Champion
Joined: Apr 2008
Posts: 7,055
Likes: 7
From: Lee County, North Carolina
Default

The comments about Dayco being a problem is funny because I've had my Dayco belt (the lifetime warranty one that's about $40) for a couple years and it doesn't make a peep.
The belt tensioner on the other hand used to click and clack for quite a while before I finally got a new one.
 
Reply
Old Feb 5, 2011 | 04:52 PM
  #15  
CPTAFW163's Avatar
CPTAFW163
Champion
Joined: Jun 2004
Posts: 2,811
Likes: 2
From: Ft Campbell, KY/TN
Default

Check these vids. The pulley system might be out of alignment at the water pump or steering pump:

First, you need to see if it is a chirp or squeal

Belt chirp caused by pulley misalignment: 2nd gen ram used!!!
http://www.youtube.com/watch?v=X9qMt...eature=related

belt squeal caused by bad pulley:
http://www.youtube.com/watch?v=sli3FnPfdQ4

Belt noise causes and solutions:
http://www.youtube.com/watch?v=cW_wp...eature=related
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 03:57 PM.