I looked all over this forum about the 1.7 rockers, and I couldnt find the answer to my question. I have a stock ram 1500 5.2 with a hollowed cat and a straight pipe on it. My question is can I put the 1.7 rockers on with no mods done to my truck, no motor work has been done to it and I would like too, I saw this was the best way to get power later would come headers and a 14x3 filter. If someone could help me out I would apprecate. Can I put 1.7 rockers in my stock motor?

 

Yes......(message was to short)

 

Yes you can. Said that most people do more then just that mod at the same time.

 

Where do you recommend buying them from, and the price of them?

What other mods would you do if you were doing the rockers?

 

Harland Sharp, roller rocker arms

 

The only ones that work with stock are Harland Sharp rockers.
http://www.summitracing.com/parts/CS...7&autoview=sku

Here is my post on the install. There are no instructions on how to install included in the kit. Go off of others installations.
https://dodgeforum.com/forum/2065727-post3.html

Here are a few more posts.
http://www.pavementsucks.com/tech-article-32.html
https://dodgeforum.com/forum/2nd-gen...r-install.html

 

This is where you should buy them. http://www.southeastperformance.com/

 

How much are they from here? Whats the difference between from southeast and summit?

 

just be sure to check that the factory stock valve springs will not bind due to the increased ratio rockers.

 

I went all out Rockers, FI airgap, 52mm TB, and for touch ups mopar air filter, valve covers, all tuned by hemifever