2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

5.2 engine troubles

Thread Tools
 
Search this Thread
 
Old Mar 24, 2011 | 10:45 PM
  #11  
Ramzy's Avatar
Ramzy
Veteran
Joined: Nov 2010
Posts: 302
Likes: 0
From: Southwest Arkansas
Default

Want to apologize first for thread-jacking this thread.

Glad to see this thread as I am having the same issue. I already replace TPS for a diff problem so it's time to clean the IAC. I did the plugs, wires, cap, and rotor while I had the keg off. When the engine is cold i.e. during cold start cycle I can rev it, let off and it idles fine at 750 or so. Once it warms up though rev it and let off RPM drop to 250 then recovers and idles fine. I'm wondering if I bumped the keg when putting it on and created a vacuum leak around an intake runner.
 
Reply
Old Mar 25, 2011 | 05:13 PM
  #12  
ryan0714's Avatar
ryan0714
Record Breaker
Joined: May 2010
Posts: 1,322
Likes: 1
Default

check vacuum with a gauge if you feel the need, idle should be pullin around 17-20psi.
 
Reply




All times are GMT -4. The time now is 10:51 AM.