2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Need some advice

Thread Tools
 
Search this Thread
 
  #1  
Old 03-12-2011 | 06:09 PM
2000RamHead's Avatar
2000RamHead
Thread Starter
|
Registered User
Joined: Nov 2009
Posts: 47
Likes: 0
From: Fabius, NY
Question Need some advice

hey guys i was just surfin the web and is there any decent performance chips or programmers for the 5.9? ( I know the cheap chips are junk I am just not familiar with the good ones, I dont want to pay alot of money and get a piece of crap.) any advice is appreciated.
 
  #2  
Old 03-12-2011 | 08:27 PM
FireDodge's Avatar
FireDodge
Captain
Joined: Nov 2010
Posts: 571
Likes: 1
From: Nebraska
Default

SuperChips SCT is one of the best from what people are saying on here. I don't have any personal experience because my 1996 has the old computer.
 
  #3  
Old 03-12-2011 | 09:13 PM
redneck_ram's Avatar
redneck_ram
Champion
Joined: Nov 2009
Posts: 4,081
Likes: 1
From: Rochester, NH
Default

i have a superchips forsale as we speak. it will work on your truck. i had it installed on my 01. heres the link.
 
  #4  
Old 03-13-2011 | 04:05 PM
2000RamHead's Avatar
2000RamHead
Thread Starter
|
Registered User
Joined: Nov 2009
Posts: 47
Likes: 0
From: Fabius, NY
Default

ok thanks for the advice but do u know the kind of power you get from the superchips sct?
 
  #5  
Old 03-13-2011 | 04:06 PM
2000RamHead's Avatar
2000RamHead
Thread Starter
|
Registered User
Joined: Nov 2009
Posts: 47
Likes: 0
From: Fabius, NY
Default

or the 3715
 
  #6  
Old 03-13-2011 | 04:14 PM
redneck_ram's Avatar
redneck_ram
Champion
Joined: Nov 2009
Posts: 4,081
Likes: 1
From: Rochester, NH
Default

i dont know the actual amount of power i got, but i know that the acceleration is 100x better than when i got it. of course i had the death flash, which im sure you do too. before the superchips tuner, my truck struggled to get to 70, not i can hit 70 and high all dya long no problem now. i can do brake stands all day long now compared to before i couldnt. the tuner i have can read check engine codes, change the speedo for tire size, and raises the shift rpms. this is a decent upgrade for what it is. its very easy to install, and onyl takes about 5 minutes, give or take a few seconds. i can get you pics if needed, just let me know!
 
  #7  
Old 03-13-2011 | 04:24 PM
2000RamHead's Avatar
2000RamHead
Thread Starter
|
Registered User
Joined: Nov 2009
Posts: 47
Likes: 0
From: Fabius, NY
Default

ok thanks, yeah I am just looking for the low end power cause after 25 to 30 mph it pulls pretty hard it is just that initial get up and go it doesnt want to get out of its own way. again thanks for the help ill be letting u know if I decide to go that route.
 

Trending Topics

  #8  
Old 03-13-2011 | 04:31 PM
redneck_ram's Avatar
redneck_ram
Champion
Joined: Nov 2009
Posts: 4,081
Likes: 1
From: Rochester, NH
Default

Originally Posted by 2000RamHead
ok thanks, yeah I am just looking for the low end power cause after 25 to 30 mph it pulls pretty hard it is just that initial get up and go it doesnt want to get out of its own way. again thanks for the help ill be letting u know if I decide to go that route.
oh yeah, i have PLENTY of low end. i know i definately got a ton more just by using this tuner. just let me know. i really need to get rid of this thing because im going a different route.
 
  #9  
Old 03-13-2011 | 05:10 PM
redneck_ram's Avatar
redneck_ram
Champion
Joined: Nov 2009
Posts: 4,081
Likes: 1
From: Rochester, NH
Default

i have a potential seller, but if you want it and can come up with the money before him its yours. im selling it to him for 300 shipped. hes not going to have the money for 12 days. let me know. thanks.
 
  #10  
Old 03-13-2011 | 05:39 PM
xjarhead69's Avatar
xjarhead69
Record Breaker
Joined: Nov 2009
Posts: 1,044
Likes: 0
From: Leesburg, IN


Quick Reply: Need some advice



All times are GMT -4. The time now is 06:13 PM.