When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Anyone know where I can find them? This is the plastic insert that keeps mud and debris from flying back into the bumper. I bought the truck without one on the passenger rear and I can't find on online anywhere. I've done a little junk yard hunting, but I still can't find them. Everything I've found online is for the front only.
Anyone know where I can find them? This is the plastic insert that keeps mud and debris from flying back into the bumper. I bought the truck without one on the passenger rear and I can't find on online anywhere. I've done a little junk yard hunting, but I still can't find them. Everything I've found online is for the front only.
I find it very hard to believe you can not find one in the junkyard. As far as I know, they did not change from 94-01. Find a new junkyard. If you give up, call the stealership and expect to get bent over.
I find it very easy to belive that he couldn't find one in the yards, around here it's a mircale to even find one of these trucks let one one with parts left on it. Last one I saw had like fifteen guys pulling parts off it at the same time.
I'm at the point now where I think I might just start my own Dodge Ram and Chevy S-10 junkyard. I cannot for the life of me find any good parts anymore for these trucks.
That said, I would be able to find the rear inner fenders real eaisly.
I'd be up for helping with that junkyard. Around here the only place you can find one is from the stealership. The junkyards aren't much more than crashed hondas, toyotas, and kia. Purpl, where is it you could find one so easy?
Heh.. I was thinking Almost the same thing. I found two 1500's on my local craigslist page, one in parts with a busted rear axle and a 5.2. The other was in the sales page with a broken front yoke and rust with a 5.9.
Also I'd have a 89 S10 blazer body and 4.3 engine that ran good when it was parked for ya.
LMC has them for abot $70.00. I got one last year from some other website for around $60.00. Don't forget to buy the clips to fasten it in when you buy or find one though.
LMC has them for abot $70.00. I got one last year from some other website for around $60.00. Don't forget to buy the clips to fasten it in when you buy or find one though.
I used 1/4'' stainless steel bolts from the hardware store. I hate those damn factory rivets.
Anybody got pics of how they mount up, been looking at gettin a set since my truck never came with them from the factory, but wasnt sure what they mounted too.