DodgeForum.com

2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Automatic Door Locks Not Working

   
Old Apr 12, 2011 | 12:48 PM
Share
  #1  
Dodgerman97's Avatar
Dodgerman97
Thread Starter
|
Rookie
Joined: Apr 2011
Posts: 72
Likes: 0
Default Automatic Door Locks Not Working
My automatic door locks no longer work on my keypad for my 97 ram 1500, and my right side wont even work when I push the button on the door... Any ideas on how to get them to function again?
 
Reply
0
Old Apr 12, 2011 | 01:19 PM
Share
  #2  
jaqattack02's Avatar
jaqattack02
Registered User
Joined: Apr 2011
Posts: 33
Likes: 0
From: Richmond, VA
Default
Are you sure the keypad (I assume you mean the keychain/remote thing) is still working? Maybe the battery went dead. For the door locks, I'd pull the door panel and make sure everything is still hooked up properly.
 
Reply
0
Old Apr 12, 2011 | 02:20 PM
Share
  #3  
Dodgerman97's Avatar
Dodgerman97
Thread Starter
|
Rookie
Joined: Apr 2011
Posts: 72
Likes: 0
Default
I'm going to replace the battery in the keypad today, but I was unsuccessful in finding anything when I had the panel off. Not sure on what to look for
 
Reply
0
Old Apr 12, 2011 | 02:25 PM
Share
  #4  
jaqattack02's Avatar
jaqattack02
Registered User
Joined: Apr 2011
Posts: 33
Likes: 0
From: Richmond, VA
Default
I just meant make sure all the plugs and stuff are plugged, and nothing is obstructing any of the moving parts.
 
Reply
0
Old Apr 12, 2011 | 09:07 PM
Share
  #5  
Dodgerman97's Avatar
Dodgerman97
Thread Starter
|
Rookie
Joined: Apr 2011
Posts: 72
Likes: 0
Default
Yes, everything seems to be plugged in. And I replaced the battery for the keypad. And the locks aren't recognizing the keypad...
 
Reply
0
Back to Subforum
2nd Gen Ram Tech
View Next Unread
440 swap vs 360 rebuild


Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -4. The time now is 10:14 PM.