2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

just ordered my underdrive pulley

Thread Tools
 
Search this Thread
 
Old May 5, 2011 | 09:12 AM
  #61  
97tn4x4's Avatar
97tn4x4
Record Breaker
Joined: Mar 2009
Posts: 1,814
Likes: 0
From: Memphis, TN
Default

The water pump pulley should speed it back up to normal not slow it down more.
 
Reply
Old May 5, 2011 | 09:29 PM
  #62  
Dycrow27's Avatar
Dycrow27
Veteran
10 Year Member
Joined: Mar 2011
Posts: 285
Likes: 0
From: Ridgely, MD
Default

With this set would i need to get a new belt if so how much would this run me? Also, is this all the stuff i need buy the kit and throw it on my motor and i'm good to go?
http://www.hughesengines.com/Index/p...=&partid=26369
 
Reply
Old May 5, 2011 | 10:53 PM
  #63  
dodgeman2289's Avatar
dodgeman2289
Thread Starter
|
Captain
Joined: May 2010
Posts: 633
Likes: 1
From: martin county/florida
Default

i think as stated above if u got that kit you should be good.. u gain the extra power and still keep good charge for the alternator.. mine was 36-53 with shipping so that kit is prob gonna be like 70-80 after shipping!
 
Reply
Old May 5, 2011 | 10:55 PM
  #64  
dodgeman2289's Avatar
dodgeman2289
Thread Starter
|
Captain
Joined: May 2010
Posts: 633
Likes: 1
From: martin county/florida
Default

good news.. im prob gonna get my pulley installed tomorrow. hopefully im taking it to my buddys he has all the tools and gonna get at it.. hopefully everything goes good.
 
Reply
Old May 5, 2011 | 10:56 PM
  #65  
CPTAFW163's Avatar
CPTAFW163
Champion
Joined: Jun 2004
Posts: 2,811
Likes: 2
From: Ft Campbell, KY/TN
Default

Originally Posted by Dycrow27
With this set would i need to get a new belt if so how much would this run me? Also, is this all the stuff i need buy the kit and throw it on my motor and i'm good to go?
http://www.hughesengines.com/Index/p...=&partid=26369
since they are BOTH underdrive, you will need a shorter belt.

The only way you don;t need a shorter belt is to get the 3 piece march pulley set. About 160 dollars. ALSO, you need to check your crank pulley and water pump.

If your truck is 1998+ you will need to get the 1997 and earlier water pump. 1998 and up has a water pump with a PRESSED IN pulley on the water pump.

Also, if you have a 2000-2001 5.9, you will need to get a new balancer. The 2001-2001 has a ONE PIECE balancer and pulley. So you cannot use the stock balancer. You need to get the balancer that you bolt to the pulley yourself.
 
Reply
Old May 5, 2011 | 11:00 PM
  #66  
Dycrow27's Avatar
Dycrow27
Veteran
10 Year Member
Joined: Mar 2011
Posts: 285
Likes: 0
From: Ridgely, MD
Default

95 inch belt with the 2 underdrive pulleys? Also, where could i get a new belt at?
 
Reply
Old May 5, 2011 | 11:05 PM
  #67  
dodgeman2289's Avatar
dodgeman2289
Thread Starter
|
Captain
Joined: May 2010
Posts: 633
Likes: 1
From: martin county/florida
Default

Originally Posted by Dycrow27
95 inch belt with the 2 underdrive pulleys? Also, where could i get a new belt at?
idk about if ur gonna need a new belt.. but dont quote me on that one.. but u can get a new belt from any auto part store just tell them the size.. 95 or 95 3/4 not sure those are just the 2 that have been listed above!
 
Reply
Old May 5, 2011 | 11:07 PM
  #68  
CPTAFW163's Avatar
CPTAFW163
Champion
Joined: Jun 2004
Posts: 2,811
Likes: 2
From: Ft Campbell, KY/TN
Default

Originally Posted by Dycrow27
95 inch belt with the 2 underdrive pulleys? Also, where could i get a new belt at?
do not get the hughes set. You will not like underdriving your alternator.

Get this one from hi-potek
http://stores.hi-potek.com/-strse-90...eel/Detail.bok

Email Rich and tell him if he will match the price on the steel pulley (or give you free shipping). he will probably be able to get you hooked up with a belt as well.
Richard@hi-potek.com

He is a great guy to work with. He is getting me a 3 high cat (CA emissions) magnaflow system SHIPPED for 20 dollars cheaper than the NON SHIPPED price from another site.
 
Reply
Old May 5, 2011 | 11:13 PM
  #69  
dodgeman2289's Avatar
dodgeman2289
Thread Starter
|
Captain
Joined: May 2010
Posts: 633
Likes: 1
From: martin county/florida
Default

thats quoted at 25% and hughes is at 30% and thats a good 30$ more for 25% to the 53 shipped 30%
 
Reply
Old May 6, 2011 | 12:00 AM
  #70  
saleen288's Avatar
saleen288
Rookie
Joined: Mar 2011
Posts: 50
Likes: 0
From: Washington
Default

did you get ur pulley in yet?
 
Reply



All times are GMT -4. The time now is 02:52 AM.