Best place to get 12v for accessories
#1
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
I am about to install a CB and some other interior accessories. I was just wondering where y'all get 12v for your stuff at. I was debating whether to get it off the cig plug (which would be switched) or whether I should run a power block/fuse block and put it underneath the back seat and have a relay off the ignition for it to be switched. If anyone has any advice or pics I would greatly appreciate them.
#2
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
i ran my cb directly to the battery so i can still use it if i dont have the truck on, also i installed a overhead console out of a 97 and wired the map lights directly to the battery for the same reason.
my fogs are also wired to the battery, and i have the switch in the overhead console.
i bought some battery post wire taps from autozone for like $3, and a couple inline fuses.
for my gps i bought a add-a-fuse from autozone, pulled the radio fuse and installed it.
now my gps turns on/off with the key.
my fogs are also wired to the battery, and i have the switch in the overhead console.
i bought some battery post wire taps from autozone for like $3, and a couple inline fuses.
for my gps i bought a add-a-fuse from autozone, pulled the radio fuse and installed it.
now my gps turns on/off with the key.
#5
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
I have a Genos Garage Mount from a 2nd Gen for sale. Its on ebay and on CL.
http://cgi.ebay.com/ws/eBayISAPI.dll...#ht_500wt_1156
http://cgi.ebay.com/ws/eBayISAPI.dll...#ht_500wt_1156
#6
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
I have a Genos Garage Mount from a 2nd Gen for sale. Its on ebay and on CL.
http://cgi.ebay.com/ws/eBayISAPI.dll...#ht_500wt_1156
http://cgi.ebay.com/ws/eBayISAPI.dll...#ht_500wt_1156
#7
Trending Topics
#9
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
I had a Uniden Bearcat with a glass mount that worked great. Also had a Cobra 19 mounted next to it with a Wilson 1000 mounted in the stake hole. That also worked well, good SWR readings made for great TX and RX.