Getting ready to replace the plenum with a new aluminum plate and new felpro gaskets as well as a full tune up.

For those of you who have done this before, which gaskets did you use the black RTV gasket sealer on? I know you put it in the corners of the intake but did you use any on the plenum gasket it's self or the gaskets between intake and the heads?

Thanks!

 

I believe I just used it on the corners, do not use any on the plenum gasket itself.

 

I put some on the corners of the end seals (china walls) as well as around the coolant ports. If you do the same, make sure you only put a THIN COATING on .