When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Then there should be no problem's posting some picture's. Would like to see this JEG'S Y-Pipe installed and alot of guys say they have one but can not seem to find any pic's of it installed.
ask and ye shall receive! not the best as it was getting kinda dark outside. i'd be happy to take more if needed
this was the booger of a pipe. the clamp on the other one had pretty much created a bond between the two pipes so we had to cut it off with enough left to get the new one in.
clamp before the y
pic of the y and front o2
and just a random pic of the exhaust that exits a little after the cab.
Last edited by blackbeasst; 07-18-2011 at 09:35 PM.
Thx for the picture's and so quick. On the third pic it looks to be welded at the down pipe. Did you have to cut it there or thats the way they come? Hoping for picture's of the actual y-pipe with the down tubes and o2's? Whats the white stuff in the first picture?
Thx for the picture's and so quick. On the third pic it looks to be welded at the down pipe. Did you have to cut it there or thats the way they come? Hoping for picture's of the actual y-pipe with the down tubes and o2's? Whats the white stuff in the first picture?
its pre-welded from jegs. here's the stock pic
and the white stuff is actually the grey gooey stuff to seal the two pipes. the flash on the camera makes it look white
The actual JEG'S Y part with o2 sensors were the 2 down pipes merge? That the important part i think. O2 wont fit if its off plus like to see how they actually merge the 2 pipes. Thinking we could make one little cheaper maybe. Pending how JEG'S did there's. ok i see it now your pic is dark sorry.
The actual JEG'S Y part with o2 sensors were the 2 down pipes merge? That the important part i think. O2 wont fit if its off plus like to see how they actually merge the 2 pipes. Thinking we could make one little cheaper maybe. Pending how JEG'S did there's.
the pic i posted is from jegs. no lie its a direct fit as long as you leave enough room in the old pipe.
unless theres something im missing about what you are talking about the pipes merging i got that in the third pic.
edit: yeah sorry it was gettin dark! i have to scroll up a little more on my laptop to see it good as well!