2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Please Help

Thread Tools
 
Search this Thread
 
Old Dec 7, 2011 | 08:23 PM
  #31  
laharve5's Avatar
laharve5
Thread Starter
|
Amateur
Joined: Mar 2011
Posts: 38
Likes: 0
Default

http://s1118.photobucket.com/albums/...207_161037.mp4
 
Reply
Old Dec 7, 2011 | 11:05 PM
  #32  
laharve5's Avatar
laharve5
Thread Starter
|
Amateur
Joined: Mar 2011
Posts: 38
Likes: 0
Default

I'm not sure if you can hear the crackling noise when turning wheel. Clockspring was replaced. Horn airbag and cruise now work. But as you notice in other video, the orange gear indicator has slow reaction.
 
Reply
Old Dec 8, 2011 | 02:47 PM
  #33  
laharve5's Avatar
laharve5
Thread Starter
|
Amateur
Joined: Mar 2011
Posts: 38
Likes: 0
Default

Has anyone watched those videos?
 
Reply
Old Dec 8, 2011 | 06:00 PM
  #34  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,370
Likes: 4,209
From: Clayton MI
Default

Who replaced the clockspring?
 
Reply
Old Dec 8, 2011 | 06:08 PM
  #35  
dlyter09's Avatar
dlyter09
Champion
Joined: Apr 2011
Posts: 3,574
Likes: 0
From: Harrisburg,PA
Default

The gear indicator is most likely out of adjustment. The drop down panel under the wheel just needs pulled off and you will find the white adjustment thinger attached to the column... Take a good look at how it works and make adjustments as needed.
 
Reply
Old Dec 8, 2011 | 07:52 PM
  #36  
laharve5's Avatar
laharve5
Thread Starter
|
Amateur
Joined: Mar 2011
Posts: 38
Likes: 0
Default

. I purchased clockspring from advance. I had a local frame shopshop do alignment and install clockspring.
 
Reply
Old Dec 8, 2011 | 10:09 PM
  #37  
laharve5's Avatar
laharve5
Thread Starter
|
Amateur
Joined: Mar 2011
Posts: 38
Likes: 0
Default

It turns easier to the right. But the alignment is good!
 
Reply
Old Dec 9, 2011 | 08:59 AM
  #38  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,370
Likes: 4,209
From: Clayton MI
Default

I would have a chat with the folks that did the install, and see what they have to say.
 
Reply
Old Dec 9, 2011 | 10:28 PM
  #39  
laharve5's Avatar
laharve5
Thread Starter
|
Amateur
Joined: Mar 2011
Posts: 38
Likes: 0
Default

Yes I am definitely calling first thing Monday after today's episodes. I was turning onto a busy highway and it seemed as if it locked up I yanked it hard to keep from making a 360 into the field and something broke I can feel it moving around when turning. The horn and cruise control still work.
 
Reply




All times are GMT -4. The time now is 11:19 AM.