I had one on my 99 1500 (already on when I bought it) and it came off easy by just removing the screws (thankfully no glue) but the holes needed to be filled and repainted the whole roof. So $450 later its finally gone. I'd be willing to sell it for a nominal amount plus shipping costs if anyone is interested.

 

Well,I used ot install them we did an average of 4 a WEEK over several years.... we taped them in place, marked teh holes, drillthem and them put big blobs of silicone at allthe holes to ensure noleak.... i know some guiys have used Window urethane, which is NOT coming off easily... I;m gettign ready to do factory cab lightson mine, yeah, holes in the roof

 

apizz...if two60s doesn't get his off in one piece..then I'll prob be interested in yours...what would you be asking..again this is only if two60s doesn't come off in 1 piece.

 

.
Have an appointment for next Tuesday to have a Body Shop try to pull it off. Hopefully it and the paint underneath survive.

.

 

$50 and cover shipping

 

what are you gonna do about the holes in the roof once they DO get it off?

 

Ok, don't know if you still wanna know or not but my mechanic said he used goo gone and a heat gun.

 

.
Thanks Hanson. We'll see if ours comes off without a fight on Tuesday.

Once off, I'll probably re-install the screws and 'caps'. Eventually we may have the holes filled and painted.

.

 

.
Well, the 'Uni-Brow' (as the wife calls it) is off. It did come off in one piece (PastFast) thankfully. As feared, the person who installed it, used windshield urethane along with the 12 screws into the roof. Let's just say the body shop guys had a blast removing the urethane piles off the roof. They were slowly shaving them off with razorblades. Poor guys. 99% of the urethane came off the roof, and there's a slight dis-coloration where the visor used to sit, but I think it looks much better. For now, I just siliconed new screws back into the roof, and painted the screw-head caps white. Eventually, we'll have the holes welded up and the roof repainted.










For anyone wanting to put one of these ugly things on their truck (I don't know why)... please think about the person who may buy your vehicle in the future, and wish to remove it. Don't use windshield urethane to mount it up! 3M tape along with the 12 screws will work just fine.

PastFast - I'll start looking for a box to ship the visor in, and I'll see how much shipping will be and let you know, if you're still interested in it. Can I get your zipcode? Remember, it's whilte and has the holes for roof marker lights in it. I'll also send the old screws used to mount it in a zip-lock bag. You'll be able to find new ones like I did at Lowe's using the old ones as a sample.

.

 

i wasn't the one looking to buy it.... that was pastfast