When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Probably a dumb questin, but it something like this ok, please see the attached video. I can just grab it and without much force move it back and forth, no vertical play at all though. Boots are torn, but I greased both ends today. Normal?
Sorry for the awful quality the sun screwed me and I took it with my phone
I can't really tell anything from the vid. It looks like your twisting it, correct? If so, they do twist normally. The ends are a ball and socket, and it appears that what you are doing is twisting the socket around the ball which would be normal movement.
I can't really tell anything from the vid. It looks like your twisting it, correct? If so, they do twist normally. The ends are a ball and socket, and it appears that what you are doing is twisting the socket around the ball which would be normal movement.
Yes, I guess you would call it twisting. Heres what I did. I layed on my belly head facing the tailgate, I reached under the rod and rolled my hand toward my head then back toward the tailgate, thats how it moves and makes the knocking noise. It doesnt have play any other way. That normal ?
From what your describing, yes it does appear to be normal.
Alright good had me confused cause the trucks been driving great and it just went through st inspection and they do check all the front end components...